Dhcp Setting - Muratec MFX-1430 Network Manual

DHCP setting

If a DHCP (Dynamic Host Configuration Protocol) server is installed on your net-
work, the machine will be assigned the IP address and Subnetmask automatically
when the machine is turned on at first time. According to the DHCP server setting,
a Gateway address and DNS server address may be assigned as well.
IMPORTANT: Once the DHCP server has assigned the IP address to your machine, that IP
address MUST be reserved within the specific DHCP scope. Failure to do so
could result in failed operation when the IP address lease expires.
NOTE: • You can view the assigned addresses on the TCP/IP setting menu display.
• The IP address and Subnet Mask assigned from the DHCP server cannot be
modified.
• A "Gateway Address" and "DNS server address" will be not assigned when
the primary and secondary address of them are already registered.
NOTE: If the DHCP server is not installed on your network, turn this setting to OFF
and you should enter the IP address and Subnetmask manually.
2-4 Network settings