Smb Settings; Opening The Smb Setting Menu Display - Muratec MFX-1430 Network Manual

SMB settings

These settings are required if your LAN uses "NetBIOS over TCP/IP" protocol.
NOTE: Contact your network administrator if you are unsure about this setting.
IMPORTANT: In order to activate new settings, the machine must be rebooted after the new
settings have been entered. Turn the machine "Off" and after three or more
seconds, turn the machine back "On".

Opening the SMB setting menu display

1
Press [Setting] on the control panel.
2
Press [Management].
3
Press [Network Settings].
2-10 Network settings