Introduction; Alarm Reporting Chart - AEI HA-266 Owner's Manual

a) If the answering beep is 1 BEEP , system is in disarmed state.
Enter [USER CODE 1] and validate by [#]
USER CODE 1 #
!
The system is armed instantly.
!
2 BEEPS will be heard.
b) If the answering beep is 2 BEEPS , system is in armed state.
Enter [USER CODE 1] and validate by [#]
USER CODE 1 #
!
The system is disarmed instantly.
!
1 BEEP will be heard.
c) If the answering beep is 1 BEEP+3 BEEPS
occurred.
Enter [USER CODE 1] and validate by [#]
USER CODE 1 #
!
The system is still in disarmed state, alarm is reset instantly and changes to alarm
memory.
!
1 BEEP+2 BEEPS will be heard.
d) If the answering beep is 2 BEEPS+3 BEEPS
occurred.
Enter [USER CODE 1] and validate by [#]
USER CODE 1 #
!
The system is disarmed instantly, and changes to alarm memory.
!
1 BEEP+2 BEEPS will be heard.
e) If the answering beep is 1 BEEP+2 BEEPS
memory.
i) Enter [USER CODE 1], key in [ ], enter [3] and validate by [#]---------To clear
the alarm memory only.
USER CODE 1 3 #
!
The system is still in disarmed state and the alarm memory is cleared.
!
1 BEEP will be heard.
!
The system is ready to re-arm with the entry of option (a) stated above.
ii) Enter [USER CODE 1], key in [ ], enter [6] and validate by [#]---------To clear
the alarm memory and re-arm the system.
USER CODE 1 6 #
!
The alarm memory is cleared and the system is re-armed instantly.
!
2 BEEPS will be heard.
72
REMOTE ACCESS THE SYSTEM BY TELEPHONE
, system is in disarmed state with alarm
, system is in armed state with alarm
, system is in disarmed state with alarm
HA-266

INTRODUCTION

HA-266 is a compact Alarm Control Panel with 6 hardware protection zones and 2 software
zones for panic and duress alarms, which is designed for home and office protections using the
latest security concepts. The system is built-in with auto-dialer and communicator in one unit.
When alarm occurs; it gives local alarm warnings as like the traditional alarm systems; and it
also sends out voice message to the pre-set telephones, numeric message to the auto-pagers,
and an alarm report to a proprietary monitor station which is equipped with the AEI's Alarm-
Monitor software, MS-980. The system also accepts remote control for arm-disarm, status
checking and requesting status report from any tone dialing telephone at anywhere in the world.
The communicator-dialer of the system is compatible with all the public telephone systems.

ALARM REPORTING CHART

OFFICE, HOME, FACTORY,
WAREHOUSE, SHOP , ETC.
MOTION DETECTOR
MAGNETIC CONTACT HA-266
ALARM
GLASS BREAK DETECTOR
INFORMATION
ALARM
PANIC BUTTON
CONTROL
SMOKE DETECTOR
PANEL
OTHER DETECTORS
LOCAL ALARM
!
SIREN/BELL
!
STROBE LIGHT
NOTE:
The Alarm Monitor software, MS-980 is not supplied. It is required to purchase separately.
HA-266
MONITOR
STANDARD
STATION
VOICE
ALARM-MONITOR
MODEM
SOFTWARE
............
.............
PUBLIC
AUTO-PAGER
TELEPHONE
STATION
NETWORK
TELEPHONE/MOBILE PHONE
TELEPHONE/MOBILE PHONE
TELEPHONE/MOBILE PHONE
U S E R R E M O T E A R M / D I S A R M
CONTROL OR CALL FOR REPORT
FROM ANY STANDARD DTMF
TELEPHONE
POLICE
CLIENT
PROPERTY
MANAGEMENT
OFFICE
SECURITY
GUARD
CLIENT'S
PERSONAL
PAGER
5