Energy Saving - Midea MID45S201-HR Instruction Manual

Program
Description of the cycle
Washing (60℃)
Rinse
Rinsing (65℃)
90 min
Drying
Washing (50℃)
Rinse
Rinsing (45℃)
Quickly
Pre-wash
Soaking
REMARK:
EN60436:This program is for testing. This is information for testing
compatibility in accordance with the EN60436 standard

Energy saving

1.Manual pre-rinsing of dishes leads to increased consumption of water and energy and is
not recommended.
2.When a domestic dishwasher is used in accordance with the instructions for use, washing dishes
in it usually consumes less energy and water during the use phase than manual washing.
Start of the program
1.Pull out the lower and upper baskets, place the dishes and push them back. We recommend
that you fill the lower basket first, then the upper one.
2.Add detergent.
3.Connect the plug to the socket. Power supply information is provided in the "Product Data Sheet"
section. Make sure that the water supply is opened to the maximum, to full pressure.
4.Open the door and press the on/off button.
5.Select the program and the corresponding indicator will light up. Then close the door and the washing
machine will start the cycle.
Detergent
Duration
for pre-wash/
main wash
18 (g)
12 (g)
10 (g)
14
Current
(min) (kWh)
90
1.234
30
0.611
15
0.020
Medium
Water
for
(L)
rinse
10.2
10.0
3.6