Midea MID45S201-HR Instruction Manual page 27

An issue
Stained
the inside of the washing machine
White deposits in
interior
washing machines
On the dining table
accessories are
noticeable stains
from rust
Knocking in
interior
washing machines
Rattling in
interior
washing machines
Knocking in the pipes
for water
The dishes are not clean
Possible causes
Spilled agent
for rinsing.
You used a detergent
with dyes.
Hard water minerals.
That accessory is not
corrosion resistant.
You have not started
program after
addition of salt.
Into the wash cycle
there were traces of salt.
Loose lid
softener compartment
The sprinkler hits o
dishes in the basket.
There are no dishes
attached.
The reason for this may be
the place of installation or
the cross-section
pipes.
The dishes are not correct
set up.
The program was not
strong enough.
27
Solution
Always wipe up spilled rinse aid
immediately.
Choose a detergent without dyes.
Clean the inside of the washing
machine with a damp soft cloth and
dishwashing detergent. Wear rubber
gloves. Never use anything other
than dishwashing detergent to avoid
excessive foam.
Avoid washing objects that are not resistant to
corrosion in the washing machine.
After adding salt, always start the washing
program with an empty washing machine,
without selecting the Turbo function (if your
model has it).
Check the cover.
Stop the program and remove
the dishes blocking the sprayer.
Stop the program and arrange the
dishes.
This does not affect the operation of the
washing machine. If you are not sure,
contact a professional plumber.
See PART TWO, "Preparing and putting
dishes in the washing machine".
Choose a more intensive program.