Midea MID45S201-HR Instruction Manual page 42

Filling the rinse aid tank
1
Lift the lid of the rinse aid
container by the handle.
3Close the lid.
Adjusting the rinse aid tank
For better drying results with a limited amount of rinse aid, the washing machine is
designed so that you can adjust the consumption yourself. Follow the steps below.
1.Open the door and turn on the device.
2.Within 60 seconds of pressing the On/Off button, press the Program button
for more than 5 seconds and then the Program Delay button to start the
setup. The rinse aid indicator flashes once per second.
3.Press the Program button to select the appropriate setting according to the hardness of your
water. The settings are changed in the following order: D1->D2->D3->D4->D5->D1. The
higher the number, the more rinse aid is used.
4.The setting is interrupted after 5 seconds of inactivity or by pressing the
on/off button.
2
Pour the rinse aid into the container and
make sure it does not overflow.
11