Midea MID45S201-HR Instruction Manual page 20

Setting up the device
Place the device in the desired location. The back of the device must lean against the wall
behind it, and the sides against the adjacent walls. The washing machine is equipped with
inlet and outlet hoses that can be placed on the right or left side.
Leveling the device
Once the washer is set up for leveling,
you can change its height by turning
the screw on the feet.
In any case, the device must not be
tilted more than 2°.
Installation of a free-standing device
Placement between existing
kitchen elements
The height of the dishwasher (845 mm)
allows it to be placed between existing
kitchen elements of the same height in
modern kitchens.
The laminated top of the washing machine does not require
special care, as it is resistant to heat, scratches and stains.
20