Connection Of Drainage Hoses - Midea MID45S201-HR Instruction Manual

Connection of drainage hoses

Place the drain hose in a drain with a minimum diameter of 4 cm, or let it drain into the
drain, taking care not to bend or crush it. The drain hose must be placed at a height of
less than 1000 mm. To prevent backflow, the free end of the hose must not be
immersed in water.
Fix the drain hose in position A or B.
Back side
dishwashers
Power cord
How to empty excess water from the intestines
If the connection to the drain pipe is located above 1000 mm, excess water may remain in the drain
hose. Excess water from the hose will need to be drained into a bowl or similar suitable container,
placed outside and lower than the sink.
Water outlet
Connect the drain hose. The drain hose must be properly attached to avoid water
leakage. Make sure that the water drain hose is not bent or crushed.
Extension hose
If you need a drain hose extension, use a similar drain hose. It must not be longer
than 4 meters; otherwise, the washing machine may wash less efficiently.
Connection to siphon
The drain water connection must be at a height of less than 1000 mm (max.) from the bottom of the washing machine.
Drain hose
Water inlet
Discharge pipe
19
Drainage
tube
AND
B
40 mm
Working
surface