Midea MID45S201-HR Instruction Manual page 22

2.If you install the washing machine in the corner of the element, leave
room for opening the door.
REMARK:
Depending on where your electrical outlet is located, you may need to cut a hole on the
opposite side of the element.
Step 2 Dimensions and placement of the decorative panel
Follow the specific installation instructions for attaching the decorative
door panel.
Semi-built-in model
Separate the velcro strip A and the velcro strip B and attach the velcro strip A to the inside of the decorative
panel. Attach the velcro strap with loops B to the outside of the dishwasher door (picture
the panel, fasten it to the door of the washing machine with screws (picture B).
AND
Velcro strap
(Velcro stripe)
B
Velcro strap
(Velcro stripe)
1. Remove the four short screws
22
Washing machine
vessel
Door
washing machines
Minimum distance
of 50 mm
A).After installing
2. Insert four long screws
Element