If problems occur, the product shuts itself off automatically.
The display will show the reason (see below).
MESSAGE
PROBLEM
A01 burning pot
displays when the combustion
dirty
air intake is below the set level
displays when the logic board
A02
is not detecting the right smoke
fan speed
displays when the thermocouple
detects a smoke temperature
A03
lower than the set value and
interprets this as the absence of
flame
displays when ignition times out
A04
unsuccessfully
Shutdown due to air flow rate
A05
sensor breakage
displays when the logic board
determines that the smoke
A06
temperature probe is broken or
disconnected
TROUBLESHOOTING
15:36
14.9
°
C
off
T
M
A01
BURNING POT DIRTY
SOLUTION
•
Check that the combustion chamber door is closed
•
Check the regular maintenance of the stove
•
Check that smoke discharge and combustion air
ducts are clean.
•
Contact the technician
•
Check that there are pellets in the tank
•
Check that the water temperature has not increased
due to the closure of a valve (call a technician)
•
Contact the technician
There are two possibilities:
NO flame:
• Check that the burning pot is seated properly and clean
• Check that there are pellets in the tank and burning pot
• Try switching it on with a solid ecological igniter (contact
the technician beforehand and follow the instructions of
the igniter supplier very carefully).
The operation must be regarded purely as a trial under the
technician's guidance
•
Contact the technician
•
Contact the technician
USER/INSTALLER
53