Advertisement
- If any problems arise, the product shuts itself off automatically.
- The display will show the reason (see below).
- Do not disconnect the power supply.
- To start the appliance again, allow the shutdown procedure to terminate and then press the ON/OFF button
on the remote control or the simplified ignition button.
- Before starting the product up again, check the reason for the shutdown and CLEAN the burning pot.
The product is equipped with the necessary safety devices but, if the burning pot is not cleaned regularly as explained
above, ignition may involve a slight detonation. If white smoke forms in the combustion chamber for a long time,
disconnect the mains supply and wait 30 minutes before opening the door and emptying out the burning pot.
SHUTDOWN MESSAGES AND THEIR SOLUTIONS:
In case of an alarm, an alarm code will appear instead of the room temperature.
While the product switches off, the status bar will alternately show "OFF" in large letters and the description of the
alarm in small letters.
If the alarm occurred with the timer active, only the timer's activation arrow will remain displayed, while the day's
time schedule will disappear.
Once the switch-off sequence terminates, only the alarm description will remain.
TROUBLESHOOTING
alternating
USER/INSTALLER
57
Advertisement
