Placing Originals; Original Orientation; Placing Originals On The Exposure Glass - Ricoh Aficio MP C2030 Operating Instructions Manual

1. Placing Originals

Placing Originals
This section describes the procedure for placing originals on the exposure glass and in the ADF.
1
Take care to place originals after any correction fluid and ink has completely dried. Not taking this
precaution could cause marks on the exposure glass that will be copied onto paper.
• For original sizes you can place on the exposure glass and in the ADF, see "Originals".
• p.17 "Originals"

Original Orientation

You can specify the original orientation if necessary.
When using the exposure glass, place the original face down. When using the ADF, place it face up.
1. ADF
2. Exposure glass

Placing Originals on the Exposure Glass

Place originals on the exposure glass.
• Do not lift the exposure glass cover or the ADF forcefully. Otherwise, the cover of the ADF might open
or be damaged.
22
BAT020S