Advertisement
Quick Links
PRODUCT DETAILS:
Part Number:
ECU Number:
Tail Harness Length Required: See Note
TBM/Lug Part Number:
Wiring Part Number:
FITTING DETAILS:
Towbar Installation Time:
Wiring Installation Time:
Total Installation Time:
Bumper Cut Required:
49-75 Pacific Drive Keysborough, VIC 3173
Phone: 1800 812 017
Email: info@haymanreese.com.au
Rev:
A
03353RW
Maximum Towing Braked:
04835
Maximum Towing Unbraked:
Maximum Static Ball Load:
21126
102483-WL
60 Mins.
Hayman Reese SmartCODE Solution Required:
35 Mins.
RPA Disable/Other:
95 Mins.
Note:
Yes
Page
INSTALLATION INSTRUCTIONS
PART NUMBER
If vehicle is fitted with RPA use tail 04936, if there
is no RPA use 400mm tail.
1
TOWBAR
03353RW
MG HS SAS23 CL4
750
kg
750
kg
75
kg
NO
YES
Issue Date:
25-05-20
Advertisement
Related Manuals for Hayman Reese 03353RW
Summary of Contents for Hayman Reese 03353RW
- Page 1 Maximum Static Ball Load: TBM/Lug Part Number: 21126 Wiring Part Number: 102483-WL FITTING DETAILS: Towbar Installation Time: 60 Mins. Hayman Reese SmartCODE Solution Required: Wiring Installation Time: 35 Mins. RPA Disable/Other: Total Installation Time: 95 Mins. Note: If vehicle is fitted with RPA use tail 04936, if there Bumper Cut Required: is no RPA use 400mm tail.
-
Page 2: Installation Instructions
1. 2. Do not, drill, cut, weld or otherwise modify the towbar. FOR TOWING PURPOSES ONLY - This towbar is designed and tested by Hayman Reese to adhere to ADR 62/02 which provides only for the expected load demands of towing. - Page 3 TOWBAR INSTALLATION INSTRUCTIONS PART NUMBER 03353RW MG HS SAS23 CL4 TOWBAR ASSEMBLY DIAGRAM ITEM DESCRIPTION MG HS SUV FWD OCT 2019 WELDED ASSY TOWBALL 50mm "D" SHACKLE 10mm HITCH BOX COLLAR COVER SMART PIN H.R STICKER COMPLIANCE LABEL DOOR RATING LABEL TRAILER BALL MOUNT BOLT HEX HD M8x30x1.25P...
- Page 4 TOWBAR INSTALLATION INSTRUCTIONS PART NUMBER 03353RW MG HS SAS23 CL4 1. Remove 2x plastic cover. Unscrew 2x screws. Disconnect the taillight harness Pull rear ward to remove the taillight Repeat for the other side 2. Unclip the wheel arch. Remove the wheel arch by lift it up.
- Page 5 TOWBAR INSTALLATION INSTRUCTIONS PART NUMBER 03353RW MG HS SAS23 CL4 4. Unscrew 2x screws under the bumper Unclip the bumper and pull rearward Disconnect the bumper sensor harness 5. Unscrew 6x bolts and 2x nuts Remove the impact beam and discard the impact beam Retain the 2x flange nut.
- Page 6 TOWBAR INSTALLATION INSTRUCTIONS PART NUMBER 03353RW MG HS SAS23 CL4 7. Feed 1x M12 wire bolt into the chassis hole. Place 1x washer and 1x nut to the bolts TORQUE M12 = 77 Nm 8. Mark and cut an area from the centre of the bumper.
- Page 7 TOWBAR INSTALLATION INSTRUCTIONS PART NUMBER 03353RW MG HS SAS23 CL4 IMPORTANT Due to possible vehicle variations, always confirm any noted vehicle colour wires with a multi-meter to ensure the correct function is identified before soldering or scotch locking. For vehicle wires denoted with two colours (example;...
- Page 8 TOWBAR INSTALLATION INSTRUCTIONS PART NUMBER 03353RW MG HS SAS23 CL4 16. Route the RHS indicator wire (1) across to the RHS tail lamp. 17. Using a multi-meter, following the table below, connect the ezy-tap (2) to the mating tail light harness wire (3).
- Page 9 TOWBAR INSTALLATION INSTRUCTIONS PART NUMBER 03353RW MG HS SAS23 CL4 24. Route the power and ground wire ring terminals (1) up over the rear suspension towards the front of the vehicle. 25. Use Cable Ties to secure the harness away from pinch points, moving parts and places of extreme heat.
- Page 10 TOWBAR INSTALLATION INSTRUCTIONS PART NUMBER 03353RW MG HS SAS23 CL4 31. With the rear bumper removed, secure tail harness (1) to towbar. 32. Route the tail harness blue connector to the blue connector on the patch loom Note: Keep harness routing clear of all sharp edges, moving parts and places of extreme heat.
-
Page 11: Customer Information
TOWBAR MAINTENANCE AND CARE: 1. Hayman Reese recommend that the towbar LUG or TBM (tow ball Mount) Pull Pin and R-clip are removed and stored when not in use. Removal of LUG or TBM (tow ball mount) is advisable when not in use to assist with any of the following. - Page 12 VEHICLE’S GLOVEBOX AFTER INSTALLATION HAYMAN REESE SMART PIN Your Hayman Reese towbar is equipped with Smart Pin technology to help reduce towbar tongue rattle in most driving conditions. Please ensure below instructions are understood and routine maintenance is carried out to ensure best towing experience.
Need help?
Do you have a question about the 03353RW and is the answer not in the manual?
Questions and answers