Advertisement
Quick Links
PRODUCT DETAILS:
Part Number:
ECU Number:
Tail Harness Length Required:
TBM/Lug Part Number:
Wiring Part Number:
FITTING DETAILS:
Towbar Installation Time:
Wiring Installation Time:
Total Installation Time:
Bumper Cut Required:
49-75 Pacific Drive Keysborough, VIC 3173
Phone: 1800 812 017
Email: info@haymanreese.com.au
Rev:
A
03357RW
Maximum Towing Braked:
04826
Maximum Towing Unbraked:
See Note
Maximum Static Ball Load:
21232
102439-WL
60 Mins.
Hayman Reese SmartCODE Solution Required:
60 Mins.
RPA Disable/Other:
120 Mins.
Note:
Yes
Page
INSTALLATION INSTRUCTIONS
PART NUMBER
RPA disable use 04936
Tail Length 1200mm
1
TOWBAR
03357RW
KIA SELTOS SP2 CL4
1250
kg
600
kg
130
kg
NO
YES
Issue Date:
15-06-20
Advertisement
Related Manuals for Hayman Reese 03357RW
Summary of Contents for Hayman Reese 03357RW
- Page 1 Maximum Static Ball Load: TBM/Lug Part Number: 21232 Wiring Part Number: 102439-WL FITTING DETAILS: Towbar Installation Time: 60 Mins. Hayman Reese SmartCODE Solution Required: Wiring Installation Time: 60 Mins. RPA Disable/Other: Total Installation Time: 120 Mins. Note: RPA disable use 04936 Bumper Cut Required: ...
-
Page 2: Installation Instructions
1. 2. Do not, drill, cut, weld or otherwise modify the towbar. FOR TOWING PURPOSES ONLY - This towbar is designed and tested by Hayman Reese to adhere to ADR 62/02 which provides only for the expected load demands of towing. - Page 3 TOWBAR INSTALLATION INSTRUCTIONS PART NUMBER 03357RW KIA SELTOS SP2 CL4 TOWBAR ASSEMBLY DIAGRAM ITEM DESCRIPTION KIA SELTOS WELDED ASSY. NUT PLATE ASSEMBLY WASHER PLAIN 1/2" SET SCREW HEX HD M12x45x1.25P TRAILER BALL MOUNT PLUG BRACKET NUT NYLOC HEX M4x0.7P SMART PIN...
- Page 4 TOWBAR INSTALLATION INSTRUCTIONS PART NUMBER 03357RW KIA SELTOS SP2 CL4 1. Open tailgate to expose the taillight mounting screws. Remove 2 x screws Repeat for other side. 2. Remove taillight (pull rearwards) from vehicle ensuring to disconnect from wiring harness.
- Page 5 TOWBAR INSTALLATION INSTRUCTIONS PART NUMBER 03357RW KIA SELTOS SP2 CL4 5. Under vehicle on the RH side, remove and discard the plastic cover secured with 2 x scrivets and 1 x nut. Repeat for other side. 6. Remove 2 x bolts securing the impact beam to vehicle.
- Page 6 TOWBAR INSTALLATION INSTRUCTIONS PART NUMBER 03357RW KIA SELTOS SP2 CL4 10. Using 2 people, lift the crosstube into position and secure each side arm, using the nut plates inserted in step 9, with 3 x M12 bolts complete with 1 x washer per bolt.
- Page 7 TOWBAR INSTALLATION INSTRUCTIONS PART NUMBER 03357RW KIA SELTOS SP2 CL4 IMPORTANT Due to possible vehicle variations, always confirm any noted vehicle colour wires with a multi-meter to ensure the correct function is identified before soldering or scotch locking. For vehicle wires denoted with two colours (example;...
- Page 8 TOWBAR INSTALLATION INSTRUCTIONS PART NUMBER 03357RW KIA SELTOS SP2 CL4 20. Fold the rear seats (1) down. 21. Remove the bolt (2) securing the RHS seat back. 22. Remove the trim (3) covering the RHS rear seat hinge. 23. Remove the RHS rear seat (1).
- Page 9 TOWBAR INSTALLATION INSTRUCTIONS PART NUMBER 03357RW KIA SELTOS SP2 CL4 29. At the RHS tail lamp, connect the 'RHS' tail lamp connectors on the patch harness (102439-WL) (1) in between the vehicle tail light wiring and the vehicle body wiring.
- Page 10 TOWBAR INSTALLATION INSTRUCTIONS PART NUMBER 03357RW KIA SELTOS SP2 CL4 36. Connect the trailer patch 12-way connector (1) to the ECU (2). 37. Apply double sided tape to the ECU (2) and secure it to the vehicle sheet metal. Note: Mount the ECU, ensuring the connector is orientated downwards.
- Page 11 TOWBAR INSTALLATION INSTRUCTIONS PART NUMBER 03357RW KIA SELTOS SP2 CL4 42. In the orientation shown, insert the Add-A-Fuse (1) into the slot where the previously removed fuse was located. 43. Connect the Add-A-Fuse (1) to the main harness (2). Note: To maintain correct electrical operation, ensure you insert the fuse adaptor into the allocated slot and in the orientation shown.
- Page 12 TOWBAR INSTALLATION INSTRUCTIONS PART NUMBER 03357RW KIA SELTOS SP2 CL4 50. Test the trailer patch function using a light board or multi-meter. 51. Secure all harness using cable ties (not supplied). 52. Re-fit all removed parts and secure all fasteners, ensuring there are no squeaks or rattles.
-
Page 13: Customer Information
TOWBAR MAINTENANCE AND CARE: 1. Hayman Reese recommend that the towbar LUG or TBM (tow ball Mount) Pull Pin and R-clip are removed and stored when not in use. Removal of LUG or TBM (tow ball mount) is advisable when not in use to assist with any of the following. - Page 14 VEHICLE’S GLOVEBOX AFTER INSTALLATION HAYMAN REESE SMART PIN Your Hayman Reese towbar is equipped with Smart Pin technology to help reduce towbar tongue rattle in most driving conditions. Please ensure below instructions are understood and routine maintenance is carried out to ensure best towing experience.
Need help?
Do you have a question about the 03357RW and is the answer not in the manual?
Questions and answers