Advertisement
Quick Links
PRODUCT DETAILS:
Part Number:
ECU Number:
Tail Harness Length Required:
TBM/Lug Part Number:
Wiring Part Number:
FITTING DETAILS:
Towbar Installation Time:
Wiring Installation Time:
Total Installation Time:
Bumper Cut Required:
49-75 Pacific Drive Keysborough, VIC 3173
Phone: 1800 812 017
Email: info@haymanreese.com.au
Rev:
B
03345RW
Maximum Towing Braked:
WLE70004
Maximum Towing Unbraked:
1200 mm
Maximum Static Ball Load:
21161
WLL90004
45 Mins.
Hayman Reese SmartCODE Solution Required:
30 Mins.
RPA Disable/Other:
75 Mins.
Note:
No
Page
INSTALLATION INSTRUCTIONS
PART NUMBER
VW AMAROK 2H V6 CL4 C/C
Electric Brake = Brake Prep Connector
Suits vehicles with OEM plastic rear step fitted.
1
TOWBAR
03345RW
3500
kg
750
kg
300
kg
YES
YES
Issue Date:
02-04-2021
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Hayman Reese 03345RW
Summary of Contents for Hayman Reese 03345RW
- Page 1 Maximum Static Ball Load: TBM/Lug Part Number: 21161 Wiring Part Number: WLL90004 FITTING DETAILS: Towbar Installation Time: 45 Mins. Hayman Reese SmartCODE Solution Required: Wiring Installation Time: 30 Mins. RPA Disable/Other: Total Installation Time: 75 Mins. Note: Electric Brake = Brake Prep Connector Bumper Cut Required: ...
-
Page 2: Installation Instructions
1. 2. Do not, drill, cut, weld or otherwise modify the towbar. FOR TOWING PURPOSES ONLY - This towbar is designed and tested by Hayman Reese to adhere to ADR 62/02 which provides only for the expected load demands of towing. - Page 3 SPARE WHEEL SPACER PLATE WASHER PLAIN M14x28x3 SET SCREW HEX HD M10x35x1.5P BOLT HEX HD M12x50x1.75P WASHER PLAIN M10x25x3 WASHER PLAIN 1/2" HAYMAN REESE LOGO STICKER SET SCREW HEX HD M12x45x1.5P COMPLIANCE LABEL TOWBALL 50mm DOOR RATING LABEL SMART PIN GOLD...
- Page 4 TOWBAR INSTALLATION INSTRUCTIONS PART NUMBER 03345RW VW AMAROK 2H V6 CL4 C/C WIRING ASSEMBLY DIAGRAM NOTE: TUB VARIANT SHOWN 49-75 Pacific Drive Keysborough, VIC 3173 Phone: 1800 812 017 Email: info@haymanreese.com.au Rev: Page Issue Date: 02-04-2021...
- Page 5 TOWBAR INSTALLATION INSTRUCTIONS PART NUMBER 03345RW VW AMAROK 2H V6 CL4 C/C ITEM DESCRIPTION Rear outside harness Front inside harness Trailer module –> WLE70004 Tie Straps – 300mm long Brake controller plug pin - small Brake controller plug pin - large...
- Page 6 TOWBAR INSTALLATION INSTRUCTIONS PART NUMBER 03345RW VW AMAROK 2H V6 CL4 C/C 1. Disconnect the negative battery terminal. 2. If fitted, remove bolts securing the recovery hook; discard fasteners and hook. 3. On the right side chassis rail, raise the position of...
- Page 7 TOWBAR INSTALLATION INSTRUCTIONS PART NUMBER 03345RW VW AMAROK 2H V6 CL4 C/C 5. Using two people, lift towbar up to chassis frame. Loosely secure sidearms to chassis rails with. M14 x 110mm bolt, 1 x washer and 1 x flanged ...
- Page 8 TOWBAR INSTALLATION INSTRUCTIONS PART NUMBER 03345RW VW AMAROK 2H V6 CL4 C/C IMPORTANT Due to possible vehicle variations, always confirm any noted vehicle colour wires with a multi-meter to ensure the correct function is identified before soldering or scotch locking. For vehicle wires denoted with two colours (example;...
- Page 9 TOWBAR INSTALLATION INSTRUCTIONS PART NUMBER 03345RW VW AMAROK 2H V6 CL4 C/C 9. Route the trailer harness to the socket plate and fix the trailer harness with enclosed tie straps. Mount the trailer socket. (AA) 10. Remove the dash end panel (1).
- Page 10 TOWBAR INSTALLATION INSTRUCTIONS PART NUMBER 03345RW VW AMAROK 2H V6 CL4 C/C 15. Connect internal harness (2) as shown. Make sure that the connectors are fully home by hearing the locking. 16. Connect the trailer ECU (3) using connector (D). Find...
- Page 11 TOWBAR INSTALLATION INSTRUCTIONS PART NUMBER 03345RW VW AMAROK 2H V6 CL4 C/C 18. All other production times are not affected. Option 1 19. If empty, place enclosed fuses 10A into fuse slot F60 and F61. Option 2 20. Enclosed fuses are not needed.
- Page 12 TOWBAR INSTALLATION INSTRUCTIONS PART NUMBER 03345RW VW AMAROK 2H V6 CL4 C/C 21. Re-connect the battery. 22. Next step is coding of vehicle. Pay attention to the “SmartCODE” instruction (Appendix). 23. Check all light functions. Before testing the lights and automatic parking...
- Page 13 TOWBAR INSTALLATION INSTRUCTIONS PART NUMBER 03345RW VW AMAROK 2H V6 CL4 C/C 25. Install brake controller plug. 49-75 Pacific Drive Keysborough, VIC 3173 Phone: 1800 812 017 Email: info@haymanreese.com.au Rev: Page Issue Date: 02-04-2021...
-
Page 14: Customer Information
TOWBAR MAINTENANCE AND CARE: 1. Hayman Reese recommend that the towbar LUG or TBM (tow ball Mount) Pull Pin and R-clip are removed and stored when not in use. Removal of LUG or TBM (tow ball mount) is advisable when not in use to assist with any of the following. - Page 15 VEHICLE’S GLOVEBOX AFTER INSTALLATION HAYMAN REESE SMART PIN Your Hayman Reese towbar is equipped with Smart Pin technology to help reduce towbar tongue rattle in most driving conditions. Please ensure below instructions are understood and routine maintenance is carried out to ensure best towing experience.
- Page 16 OE functionality as set by OE manufacturer. Please read the vehicles owner’s manual for proper operation and understanding. Coding can be carried out using the Hayman Reese SmartCODE (HRSC) using the following steps. Note, if HRSC is unavailable, vehicle coding can be carried out by OE manufacturer as needed.
Need help?
Do you have a question about the 03345RW and is the answer not in the manual?
Questions and answers