GE AF-650 GP PROFINET Operating Instructions Manual page 62

Warnings and Alarms
No. Description
82 CSIV parameter error
85 Profibus/Profisafe Error
90 Encoder Loss
91 Analog input 54 wrong settings
243 Brake IGBT
244 Heatsink temp
245 Heatsink sensor
246 Pwr.card supply
247 Pwr.card temp
248 Illegal PS config
250 New spare part
251 New Model Number
Table 11.1 Alarm/Warning Code List
(X) Dependent on parameter
1) Can not be Auto reset via H-04 Auto-Reset (Times)
A trip is the action when an alarm has appeared. The trip will coast the motor and can be reset by pressing the reset button or
make a reset by a digital input (Parameter group E-1# [1]). The origin event that caused an alarm cannot damage the frequency
converter or cause dangerous conditions. A trip lock is an action when an alarm occurs, which may cause damage to frequency
converter or connected parts. A Trip Lock situation can only be reset by a power cycling.
LED indication
Warning
Alarm
Trip locked
PROFINET Operating Instruction
Warning Alarm/Trip
(X) (X)
X X
X X
X
X
X
X
X
yellow
flashing red
yellow and red
Alarm/Trip Lock
EC-61 Feedback Signal Monitoring
X
X
X
X
X
X
X
X
Parameter
Reference
S202
11
61
11