How To Configure; Ip Settings - GE AF-650 GP PROFINET Operating Instructions Manual

How to Configure

4 How to Configure

4.1.1 IP Settings

All IP-related parameters are located in parameter group
EN-##: The parameters are all set to PROFINET standard
values, so that only a minimum change is necessary.
4 4
EN-00 IP Address Assignment
EN-01 IP Address
EN-02 Subnet Mask
EN-03 Default Gateway
EN-04 DHCP Server
EN-05 Lease Expires
EN-06 Name Servers
EN-07 Domain Name
EN-08 Host Name
EN-09 Physical Address
The PROFINET option offers several ways of IP address
assignment.
Setting up drive with manual assigned IP address:
Parameter
EN-00 IP Address
Assignment
EN-01 IP Address
EN-02 Subnet Mask
EN-03 Default
Gateway
*= Class C IP address example. Any valid IP address can be
entered.
Setting up drive with automatic (BOOTP/DHCP) assigned IP
address:
Parameter
EN-00 IP Address
Assignment
EN-01 IP Address
EN-02 Subnet Mask
EN-03 Default
Gateway
By IP address assigned by DHCP/BOOTP/DCP server, the
assigned IP Address and Subnet Mask can be read out in
EN-01 IP Address and EN-02 Subnet Mask. In EN-04 DHCP Server
the IP address of the found DHCP or BOOTP server is
displayed. For DHCP only: The remaining lease-time can be
read-out in EN-05 Lease Expires. If lease time is set to 0 (zero)
the timer will never expire.
14
PROFINET Operating Instruction
Value
[0] MANUAL
192.168.0.003*
255.255.255.0*
optional
Value
[0] MANUAL/[1] DHCP/[2] BOOTP/[10] DCP
Read only
Read only
Read only
EN-09 Physical Address reads out the MAC address of option,
which is also printed on the label of the option. If using fixed
leases together with DHCP or BOOTP, the physical MAC
address is linked with a fixed IP address.
NOTE
If no DHCP or BOOTP reply has been received after 4
attempts (e.g. if the DHCP/BOOTP server has been powered
off), the option will fallback to the last functioning IP address.
EN-03 Default Gateway is optional and only used in routed
networks.
EN-06 Name Servers
EN-07 Domain Name
EN-08 Host Name
are used with Domain Name Server systems and are all
optional. If DHCP or BOOTP is selected as IP address
assignment, these parameters are read only.
NOTE
It is only possible to assign valid class A, B and C IP address to
the option. The valid ranges are shown in Table 4.1:
Class A 1.0.0.1 - 126.255.255.254
Class B 128.1.0.1 - 191.255.255.254
Class C 192.0.1.1 - 223.255.254.254