LED
P-1
P-2
STAT
Power Supply LED
Each power supply has an LED in the lower left corner. When the LED is:
•
steady: the power supply is plugged in
•
flashing: there is no power at that power supply but there is power to the other supply
•
off: no power to either power supply
Fan LED
Each fan has an LED located to its right. When the LED is:
•
green: the fan is plugged in and running
•
red: the fan is pulled or something is wrong
State
Lights when the SFP+-side power supply is plugged in
(power supply labeled PWR1 located on opposite end).
Lights when the QSFP+-side power supply is plugged in
(power supply labeled PWR2 located on opposite end.
Operating status as follows:
•
Fast Flash - Started and initializing .
•
Slow Flash - Initialized but not yet connected to HPE
Composable Fabric Manager.
•
Solid - Operational and connected to HPE Composable
Fabric Manager.
39
Ports and LEDs