Initial Power On; Figure 12: Breakout Or Fanout Cable - Mellanox Technologies TX6000 Hardware User Manual

2.7

Initial Power On

The system's input voltage is auto-adjusting for 100 - 240VAC, 50-60Hz power connections. The
power cords should be standard 3-wire AC power cords including a safety ground and rated for
15A or higher.
Caution: The system platform will automatically power on when AC power is
applied. There is no power system. Check all boards, power supplies, and fan tray
modules for proper insertion before plugging in a power cable.
Plug in the first power cable.
Step 1.

Figure 12: Breakout or Fanout Cable

This unit is intended for installation in a Restricted Access Location. A restricted
access area can be accessed only through the use of a special tool, lock and key, or
other means of security.
Do not plug the cords to power supplies yet.
Mellanox Technologies 18