Keypad - ACU-RITE 100S Reference Manual

Keypad

Here's an overview of the
keypad. Each key's function is
described below.
X, Y, Z
ZERO
ABS/INCR
MM
SETUP
C/L (CENTERLINE)
Reference Manual
100S
100S
Correspond with the scales on the X-, Y-, and
Z-axes. Used to specify a change to a particular
axis.
These keys reset the incremental or absolute
display position at "0" for the corresponding
axis.
Used to switch between absolute (ABS) and
incremental (INCR) measurements. The active
mode will be displayed at the top of the DRO
display.
Press this key to switch X, Y & Z displays
between English and metric units.
Provides access to the display resolution, linear
error compensation, scale resolution, and scale
count direction operations.
Locates the centerline of the workpiece
(pg. 20).
REFERENCE
35