Keypad; Displays - ACU-RITE DRO 100 Reference Manual

Introduction

Keypad

ZERO
Zero an
axis display
ZERO

Displays

At the top of the display window is a row of indicators. These tell you the current
state of the readout.
Appears when you're
positioning in metric,
dark when you are
positioning in inches.
Tells you when an
axis is displaying
In addition to the lighted indicators along the top of the display, the top axis
display will scroll longer messages that will help you step through some of the
procedures.
English / metric
conversion
Selects absolute
or incremental
display
MM DIA INCR ABS ZERO SET
diameter.
2
System setup
MM
SETUP
parameters
Selects radius or
ABS RAD
diameter display
INCR DIA
Lets you know when
you are setting an
absolute zero.
These tell you if the
position display is
incremental or absolute.
DRO 100