ACU-RITE 100S Reference Manual page 31

TROUBLESHOOTING
Symptom
Dashes
appear on
screen
(cont'd)
Error mes-
sage (E1)
appears
Error mes-
sages (E2-
E58) appear
Keys not
working
properly
28
Probable Cause
Display overflow
Power loss occurred
Causes vary
Invalid keypress
Recommended
Corrective Action
Move the table toward
the "0" position. As the
scale counts down, the
display will show the
correct position.
This is a normal mes-
sage at power up. If the
message appears at any
other time during opera-
tion, a problem may
have occurred. Refer to
pg. 31 for details.
Turn the system "off"
and then "on" again,
using the switch on the
back of the readout.
If an error (besides E1)
is still detected when the
system is powered up,
contact your
100S
tributor for
repair/replacement
procedures. Refer to pgs.
31 - 32 for a list of error
messages.
Turn the system "off" and
then "on" again, using the
switch on the back of the
readout. If an error
(besides E1) is still detect-
ed when the system is
powered up, contact your
distributor for
100S
repair/replacement proce-
dures. Refer to pg. 31- 32
for a list of error messages.
Reference Manual
100S
dis-