Locating Centerline Using Incremental Dimensions - ACU-RITE 100S Reference Manual

OPERATION

Locating Centerline Using Incremental Dimensions

1. Press the
ABS/INCR
2. Move the table to the first location.
3. Press the
ZERO
current position.
4. Move the table to the second location along the same axis.
5. Press the (centerline) key. Dashes will flash on the screen.
C/L
6. Press the appropriate key (
7. will measure the distance between the two points, then
100S
divide the sum in half. You can locate the centerline by moving the
table until the position for the axis you measured reads "0."
8. Repeat the procedure for each axis.
22
key to select the incremental display mode.
key for the appropriate axis. Doing so will zero the
, , or
X Y Z
) for the axis you're measuring.
Reference Manual
100S