Table of Contents
Advertisement
Parameter
Capacity Limit
Login Error
Send Email
Step 6 Click Confirm.
4.5.5 Storage
This section provides guidance on setting associated information of storage, and record
control.
4.5.5.1 Point
Set the storage path of snapshot.
Step 1 Select Setting > Storage > Destination > Point.
Step 2 Select Event Type as needed.
Local: Store into the TF card.
FTP: Store into the FTP server.
Step 3 Click Confirm.
4.5.5.2 Local
Display the information of local SD card. You can set hot swap, and format SD card.
Description
Configure the storage available that triggers abnormality alarm.
Only need to configure when setting Event Type to Scarcity of Storage
Space in SD Card.
Configure the number of login error allowed. The range is 3–10 times.
Only need to configure when setting Illegal Access.
The system sends an email to the defined email address when an alarm
is triggered. To set the email address, go to Setting > Network >
SMTP(Email).
Only need to configure when setting Illegal Access and Blocklist Car.
Figure 4-72 Point
68
User's Manual
Advertisement
Table of Contents
