Table of Contents
Advertisement
Question
Device error, unable to
start or operate normally
TF card hot swapping
TF card read/write limit
TF card cannot be used as
storage media
Network upgrade failed
Recommended TF card
Failed to pop up the
installation dialog box of
web control webrec.cab
5
FAQ
Solution
Press, and hold Reset button for 5 seconds to restore the
Camera to factory default Settings.
Stop recording, and image capturing, and then wait for at least
15 seconds before removing the TF card. This helps ensure
data integrity, and avoid losing all the data of the card.
Do not set the TF card as the storage media of pre-set
recording. It may damage the TF card duration.
When the TF card hibernates or its capacity is null, format the
card through web first.
Check whether the right upgrade program (such as version,
compatibility) is used.
It is recommended to use TF card of 16 GB or above. This
helps avoid data loss arising from insufficient capacity.
You can use card of 16 GB, 32 GB, 64 GB, and 128 GB.
Set the security level of IE browser as Low, and Active
Plug-in, and Control is set as Enable.
95
User's Manual
Advertisement
Table of Contents
