Event - Dahua Technology D-ITC237-PW6M-IRLZF1050-B User Manual

Parameter
Password
Web URL
Device ID
Http Time Out(s)
Keep Alive Time(s)
Character Encoding
Upload List Type
Push Picture Config
Upload Info Config
Step 3 Click Save.

4.5.4 Event

This section provides guidance on configuring alarm, and abnormality.
4.5.4.1 Alarm
4.5.4.1.1 Relay Activation
You can set several parameters of relay activation such as relay-in, period, anti-dither, and
sensor type. When triggering alarm, the system sends the alarm signal to external devices to
trigger, for example, buzz.
Step 1 Select Setting > Event > Alarm > Relay Activation.
Step 2 Select On check box to enable alarm input for the current channel.
Step 3 Select alarm input channel.
Description
Http URLprefix information of uploaded picture data.
Displays Device ID information.
Time limit (0–65535) of the device requesting access to cloud sites.
Uploading data will fail if the limit is exceeded.
Time peroid (0–65535) of keeping the device connected with cloud
sites after uploading data. It is 30 s by default.
Encoding mode of the pushed content.
UTF8: Applicable for all languages

GB2312: Only applicable for Chinese Simplified.

Select the type of list that you want to upload.
Select the pushed picture type, including Original Image, Plate
Picture, and Vehicle Body Picture.
Select the information that you want to upload.
Figure 4-68 Relay activation
65
User's Manual