Quadratec QuadraTop Adventure Top S Manual page 9

Step 7: Installing the Quarter and Rear Windows to the Top Deck Continued:
Locate the rear window and line up and slide the rear window into the "C" Channel located at the top of the
rear portion of the top deck (FIGs 53, 54 & 55).Once both quarter windows and rear window are secured to the
top deck, line up the driver's side rear zipper on the Quarter window to the zipper on the rear window and zip it
down a few inches (FIG 56). Repeat this on the passenger side of the rear window. You may have to lift the
quarter window up to secure this second zipper. Once both side zippers are secure, zip the rear window
zippers down about half way (Fig 57). You will close these zippers completely at the end of the install.
FIG 54
FIG 56
When removing the quarter windows from the Top deck, make sure the
NOTICE
zipper is completely out of the "zipper box" before removing the window.
See fig 58
FIG 58
Step 8: Installing the Top to the Jeep Body Starting at the driver's side front, attach the side belt rail
into the vehicle body by "rolling" the plastic into the slot (FIG 59). Once secure move to the rear
driver's side corner and "roll" the plastic into the Jeep body corner belt rail as shown in FIG 60. You
may have to pull the corners around towards the front or back of the vehicle to center the top on the
vehicle. Repeat this procedure on the passenger side.
FIG 59
FIG 53
FIG 55
FIG 57
FIG 60
9