Download and Install Savant Pro App ................... 12 Create Account for Savant Pro 8 App and Sync to Pro Remote ........13 Sign into Savant Pro 8 App to Sync the Pro Remote .............. 14 9
...
Before installing, configuring, and operating Savant® equipment and other vendor equipment, Savant recommends that each dealer, installer, or integrator, access and read all the required technical documentation. Savant technical documentation can be located by visiting the Savant Customer Community. Vendor documentation is supplied with the equipment.
1 Introduction This Deployment Guide will guide the installer through the process of installing, configuring, and adding a Savant Pro Remote and Savant Pro Remote Base (REM-1000) to the Savant Control system. Before You Begin Read through this document in its entirety and ensure that the following items are available: Savant Pro Remote (SUR-1000) ............................
2 Deployment Steps Follow these steps to successfully deploy the Savant Pro Remote. This page can be used as a checklist to record which steps have been completed. System Diagram, Connections, and Additional Information .................. System Overview Review the Pro Remote Base status LED and reset button operation ..............
• A maximum of two Pro Remote and Base assemblies per user zone up to a total of 16 per system are supported. • All commands (button presses) made on the Pro Remote are sent through the Pro Remote Base to the Savant Control system for processing.
4 Remote Base Hardware Overview The REM-1000 includes a Pro Remote and Pro Remote Base. The Pro Remote communicates with its Base using Bluetooth and the Pro Remote Base communicates with the Savant Control system using the local Wi-Fi network.
5 Provisioning to the Network - SmartConnect The Pro Remote Base needs to be provisioned to the local network to be able to communicate with the Savant Control system. Configuring the network parameters onto the Pro Remote Base is done with the SmartConnect Application.
Page 9
4. Locate the Remote Base in the Devices on Bluetooth section. Copy the Unique ID displayed. The Unique ID (UID) will be used later in the procedure when the REM-1000 system is added to RacePoint Blueprint®. TIP! To help learn the UID of a specific Remote Base when there is more than one Remote Base entry in SmartConnect, tap the Remote Base entry under the Devices on Bluetooth section.
5. Drag the Savant REM1000 (Savant Pro Remote) into a User Zone/Room of the Zone Component List panel. Note: The REM-1000 Pro Remote and Base cannot be added to a Global Zone. Up to two REM-1000 Pro Remote systems per User Zone are supported.
The next step is to sync the REM-1000 Pro Remote to a User Profile on the Savant Pro 8 App. This requires installing the Savant Pro 8 App onto an iOS or Android device so the remote can sync up with the Savant Pro App.
Now that the Remote and Base are configured into the Savant Control system, the next step is to download and install the Savant Pro 8 App to either an iOS or Android device. Since the Remote cannot create or manage users, the Savant Pro 8 App needs to be installed onto an iOS or Android device for the following: •...
8.2 Create Account for Savant Pro 8 App and Sync to Pro Remote 1. Tap the Savant Pro 8 icon. 2. Tap the Create Account button at the bottom of the page. Create Account – First time log-on.
3. Enter the email address and password to the account just created above 4. Select Sign In. The Savant Pro 8 App will open and display a list of available Savant Hosts. 5. Tap the Connect button of the Savant Host in your system. The configuration set on the Savant Host selected will open and the Savant Pro Remote will automatically sync to the Savant Pro 8 App.
9.1 Pro Remote Base Firmware Each time the da Vinci software is updated on the Savant Host, the host will scan the devices on the network comparing the firmware version loaded on the Pro Remote Base with the firmware in the updated da Vinci software.
Software downloads (updates) to the Pro Remote occur Over the Air (OTA) and are initially sent to the Savant Host. Once the update is loaded onto the Host, the Host can then release the software update to the Remote. The Host will initiate a download of the software to the Remote through the Remote Base as long as the criteria in the bulleted list below are met: •...
Connect all Savant devices to the same local area network (LAN) or subnet as the host. Savant recommends not implementing any type of traffic or packet shaping in your network topology for the Savant devices as this may interfere with performance.
Savant Systems, LLC is dedicated to providing prompt and effective support in a timely and efficient manner. • To contact Savant Support, access the Savant Customer Community and enter a support case ticket. • To contact Savant Sales, visit Savant.com and select Contact Us to locate a local sales representative in your area.
Regulatory The following statements are applicable to the Savant Pro Remote and Charging Base REM-1000: FCC Interference Statement: Pro Remote and Base This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.
Need help?
Do you have a question about the REM-1000 and is the answer not in the manual?
Questions and answers