June 2016 Document Supports: Savant® Pro Remote (REM-1000) Table of Contents To access the link to the topics in this document, select the topic page. Welcome to Savant Pro Remote ..........2 Hardware Overview ..............3 ...
Welcome to Savant Pro Remote Welcome to the Savant Pro Remote and Base (REM-1000). This User Guide gives an overview of the hardware, software, and how to use the touchscreen to navigate through the various main screens. Read the Pro Remote User Guide in its entirety prior to operating the REM-1000 to control your Savant Pro system.
• Scenes created on the Pro Remote are synced to the Savant Pro 8 App and vice versa. • Users added in the Savant Pro 8 App are synced to the Pro Remote. • Swipe up or down to scroll through the fields of any screen.
HELPFUL INFORMATION - Savant User (Default User Profile) If the Savant Pro system that the Remote is being added to does not have an iOS® or Android® device with the Savant Pro 8 App and a Savant Pro 8 App account created, the user available on the Pro Remote defaults to user: Savant User. The Savant User on the Remote has limited access.
When troubleshooting a problem, the Savant Support Team may require the embedded logs from the Remote. Pressing the Send Diagnostics field will upload the log files to the Remote Base and then the Remote Base will upload the files to the Savant Pro system Host. Full communications between the Remote, Remote Base, and Host are required.
Scenes make it easy to control one or more Services using a button press or tap. The Pro Remote can capture a Scene using the current states and levels of the devices in the Savant Pro system. Once the Scene is created, it will be available in the SCENE screen. Before describing how to create a Scene, it is important to know the following: Any Scenes captured on the Remote are automatically synced to the Savant Pro 8 App.
Page 8
The images are the same images available in the Savant Pro 8 App. Test your newly created Scene and verify it works as intended. Modifications to the Scene will now need to be modified using the Savant Pro 8 App.
6. SERVICES A Service controls the devices in your Savant Pro system. All the available Services for your system are located in the SERVICES screen. Refer to the Introduction to the Pro Remote Screens section above to locate the SERVICES screen.
FAVORITES screen. Favorites can't be added using the Pro Remote. − Favorites are added using either the Savant Pro 8 App or the Channel Listing Editor in RacePoint − Blueprint (Tools > Channel Listings Editor). Favorites are synced from the Savant Pro 8 App to the Pro Remote.
8. Voice Commands Your Savant Remote makes it easy to control various Services in your Savant Pro system through a series of simple voice commands. 8.1. Activate a Command To utilize the Voice Command function, do the following: Press and hold the voice command button on the front of the remote for a few seconds till the voice command ready icon appears.
As described above, a fixed version of software is installed onto the Pro Remote before leaving the factory. Once the Pro Remote and Base are configured and installed into the Savant Pro system, the Remote is eligible to receive Over The Air (OTA) software updates. OTA updates typically happen automatically with no interaction by the user.
Savant Systems, LLC. shall not be liable for any technical or editorial errors or omissions contained herein or for incidental or consequential damages resulting from the performance, furnishing, reliance on, or use of this material.
Need help?
Do you have a question about the PRO REM-1000 and is the answer not in the manual?
Questions and answers