Id Card Processing - Epson TM-S9000II-NW Technical Reference Manual

ID Card Processing

This section describes ID card processing.
1
Insert the ID card into the slot and slide it.
2
Release the ID card after it starts to be fed automatically.
3
After the ID card is ejected, remove it.
Note the precautions below. Failure to do so can cause ID card reading problems.
• Use ID cards in accordance with specifications.
• Check to make sure that ID cards are not bent, broken, or excessively embossed.
• Do not touch the IC chip of the ID card.
• Do not open a cover, touch the ID card, or block the slot while the product is processing an ID
card.
Chapter 5 Handling the Product
78