Table of Contents
Advertisement
Advanced Product Use
Software Settings
The product has memory switches and customize values as software setting functions, which can be used for
configuring various product settings.
The settings can be made by one of the methods described in the table below, by ESC/POS command, or by
Web API.
Setting item/setting methods
Transmits the power ON information
Auto line feed
Remote wake-up
Roll paper cover open during printing
Roll paper print density
Paper autocutting after closing the roll paper cover
Roll Paper Reduction
Print density when multiple tone printing
Sets time to check ink head cleaning
Print Start Position
Validation settings
Cut sheet settings
Time to enter power saving mode
Function to prevent printing on the back side of docu-
ments (endorse) without magnetic ink characters
MICR appearance judgment position using the func-
tion to prevent printing on the back side of docu-
ments (endorse) without magnetic ink characters
Settings for auto Top Logo /
Bottom Logo printing
Extended settings for auto Top Logo /
Bottom Logo printing
• For information on the software setting mode, refer to
• For details on the TM-S9000II Utility, refer to the TM-S9000II Utility User's Manual.
• For more information on the Web API, refer to the TM-S9000II-NW/TM-S2000II-NW Web API Ref-
erence Guide.
Chapter 3 Advanced Product Use
Software setting
TM-S9000II Utility
mode
✔
✔
✔
✔
✔
✔
✔
✔
"Software Setting Mode" on page
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
61.
48
Advertisement
Table of Contents
