Epson TM-S9000 Helpful Tips

Helpful Tips
®
Epson TM-S9000 Multifunction Teller Device
The most feature-rich teller device in its class.

Initial Setup Out of the Box

Unpack and follow the directions provided in the box. Take care to remove all shipping tape and protective
foam from the device. Connect the USB cable and power cable, insert the roll paper and ink cartridge. The
initialization on a brand-new unit will take approximately 5 minutes. The unit is ready when the power LED
remains solid green and all other LEDs are off.

The Scanner Has Been in Use and Now is Not Working

Check the LEDs on the unit.

Power LED is Off

Check power adapter or try a different power socket. Replace the unit if there is no power.

Power LED Solid Green, Ink LED Flashing Amber

Ink is low but not out. This is only an indication for low ink, user can continue to scan or print.

Power LED Solid Green, Error LED Solid Amber, Ink LED Solid Amber

Ink is out and new ink cartridge must be installed. Ink cartridge must be replaced to continue scanning and
printing.

Document LED is Blinking

Printer is waiting for cut sheet/check to be inserted.

Document LED is Solid

Ready to process the document.
Website: https://epson.com/support/sl/s
Contact:
Phone: 562-276-1314 (M-F 6 a.m.-8 p.m. PT, Sat. 7 a.m.-4 p.m. PT)
EPSON is a registered trademark and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation. Copyright 2018 Epson America, Inc.