Table of Contents
Advertisement
Printing Specifications
Roll Paper Printing
Printing method
Dot density
Printing direction
Print width
Characters per
*1
line
*1
Character spacing
*1
Line spacing
Maximum printing
*2
speed
Paper feed speed
dpi: dots per 25.4 mm (dots per inch)
∗1: Command configurable
∗2: The above print speed values are based on the following: 24 V, 25°C, standard density level. Printing speed is
switched automatically in accordance with the voltage applied to the product and head temperature conditions.
The maximum printing speed values above may not be attainable due to command combinations.
If the data transfer speed is lower than the maximum printing speed, the printing speed changes, which can cause
uneven print density and non-uniform feed pitch.
A slow data transfer speed can also result in intermittent printing, white banding in graphics or other problems.
Font A
Font B
Font A
Font B
Text printing (with embedded fonts)
Page mode printing
Graphics printing in monochrome
Ladder bar code, two-dimensional
symbol printing
Graphics multiple tone printing
Continuous paper feeding
Appendix A Product Specifications
Line thermal
180×180 dpi
Unidirectional with friction feed
72 mm, 512 dot positions
42
56
0.28 mm (2 dots)
0.28 mm (2 dots)
4.23 mm
300 mm/s (when line spacing is 4.23 mm: approximately
70.9 lps)
300 mm/s
300 mm/s
124 mm/s
NV/download graphics: 155 mm/s
Raster graphics: 70 mm/s
Approximately 200 mm/s
101
Advertisement
Table of Contents
