Table of Contents
Advertisement
Software Setting Mode
Use this mode to configure settings for the product's memory switches and customize values.
• Roll paper print density
• Auto paper use reduction
• Paper auto cutting after closing the roll paper cover
• Error operation setting
• Transmits the power ON information
• Communication settings
For details on memory switches and customize values, refer to
Perform the procedures below.
1
Turn off the product and open the roll paper cover.
2
While holding down Button 2, press the
3
Close the roll paper cover.
This prints software setting mode guidance. Follow the instructions that are pro-
vided.
When your finish configuring settings, they are saved to the product and initialization starts. Next,
the product transitions to its normal state (printing/scanning enabled).
Chapter 3 Advanced Product Use
"Software Settings" on page
(POWER) button to turn on the product.
ON
+
48.
61
Advertisement
Table of Contents
