Motion Computing LE1600 User Manual page 95

The system doesn't recognize
a USB device.
The Tablet PC is sitting in the
Motion FlexDock for the LE-
Series, or the Motion
MobileDock for the LS Series
but the system doesn't
recognize any accessory
devices, such as the external
monitor or DVD/CD RW.
A
UDIO
No sound is coming from the
built-in speakers.
No sound is coming from any
speakers.
I've forgotten my BIOS
password and can't access my
system.
The program I'm working in
has stopped responding, but
the cursor moves and other
programs work.
Motion Computing LE-Series and LS-Series Tablet PCs User Guide 85
Windows XP may take a short
time to recognize the device.
The accessory isn't connected
to the Tablet PC correctly.
The correct driver isn't built into
Windows XP.
The Tablet PC isn't fully
seated.
Connecting a headset or
external speakers mutes the
built-in speakers.
Audio volume is too low or has
been muted.
The Tablet PC will let you enter
several passwords incorrectly
before it temporarily locks the
system.
The program has crashed.
Wait until Windows XP
recognizes the device.
Check the connection cable
and be sure it is inserted into
the correct port on the Tablet
PC and the accessory device.
Use the device's installation
CD or check the
manufacturer's website for the
correct driver.
Reseat the Tablet PC in the
Motion FlexDock for the LE-
Series, or the Motion
MobileDock for the LS Series.
Disconnect the headset or
external speakers if not in use.
Open the Motion Dashboard,
Audio panel, and adjust the
speaker volume by sliding the
volume slider or uncheck the
Mute button.
Turn the Tablet PC off and
back on and try re-entering
your password (you can do this
as many times as needed). If
you have forgotten your
password, contact Motion
Computing Technical Support
for information about unlocking
your system at
www.motioncomputing.com/
support.
Press the SAS (Ctrl+Alt+_Del)
button (small button with a key
icon) on the Tablet PC front
panel to open the Task
Manager and end the non-
responsive program.