Motion Computing LE1600 User Manual page 58

48 Motion Computing LE-Series and LS-Series Tablet PCs User Guide
too slow/too fast..." and a green fingerprint will not appear. Swipe
your finger across the sensor again as many times as required for a
successful scan.
7. After the first scan is successful (and a green fingerprint image appears),
Motion OmniPass prompts you to scan your fingerprint additional times.
Wait until the green fingerprint disappears from the display and the finger-
print image area is blank before swiping your finger again. After OmniPass
successfully captures the same fingerprint three times, the Verify Finger-
print window appears. Swipe your finger one more time to complete the
enrollment.
When the messages "The selected finger has been enrolled in
OmniPass" and "Verification Successful!" and a green fingerprint
image appear, enrollment is nearly complete. Click Next to
complete enrollment. If you cancel, you will not be enrolled.
IMPORTANT: During the verification process, you may get red
fingerprint images or the message "Verification Failed." If this
happens, tap the Back button and try again. You can have as many
tries as you need for enrollment and verification.
8. Tap Next. When you are asked if you would like to enroll a second finger-
print, tap Yes.
IMPORTANT: We recommend that you enroll a second fingerprint.
A finger injury could prevent authentication and block access to your
accounts.
9. Repeat Steps 6-8 to enroll a second fingerprint.
10. Tap Next. The Audio and Taskbar Settings window appears. You can leave
the defaults or change the settings, as desired.
11. Tap Next. The Congratulations window appears. OmniPass recommends
that you "Export" (backup or make a copy of) your user profile so you can