Speaker Port (Le-Series); Microphone Port (Le-Series); Dvi-D Port (Le-Series); Vga Port - Motion Computing LE1600 User Manual

Speaker Port (LE-Series)

The speaker port is on the left edge of the LE-Series Tablet PC. It is marked with a
small headphones symbol and is designed as an audio output channel only. You
can attach external speakers or headphones to this port. When headphones or
external speakers are attached, the internal speakers are disabled.

Microphone Port (LE-Series)

The microphone port is on the left edge of the LE-Series Tablet PC. It is marked
with a small microphone symbol and is designed as an audio input/line in channel
only. You can attach an external microphone directly to this port to enhance your
audio recording capabilities. When an external microphone is attached, the built-in
microphones are disabled.
Audio In/Audio Out Port (LS-Series)
There is a single Audio In/Audio Out port on the LS-Series Tablet PC. That port be
used for either an audio in connection (such as line in or a microphone) or an audio
out connection (such as headphones or external speakers).

DVI-D Port (LE-Series)

The DVI-D (Digital Video Interface) Connector is on the left edge of the Tablet PC
and is identified by the DVI-D designation. This connector is provided for the direct
attachment of a digital video monitor. An optional DVI-D cable is available from
Motion Computing for this purpose. When an external monitor is attached, the
Motion Dashboard Display panel settings can be used to set the external display
as a mirrored or extended display.

VGA Port

The VGA Connector is on the left edge of the Tablet PC. It is intended for use with
standard analog video displays. An attachment cable is not provided for this
purpose; if you use the Tablet PC with a standard VGA-type display, you will need to
purchase a corresponding cable. When an external monitor is attached, the Motion
Dashboard display settings can be used to set the external display as a mirrored or
extended display.

Docking Port

The Docking Connector is at the bottom edge of the Tablet PC. It is designed to
integrate the LE-Series Tablet PC with the Motion FlexDock for the LE-Series, or
the Motion MobileDock for the LS-Series. When the LE-Series or the LS-Series is
used with the FlexDock or the MobileDock, the port connections on the Tablet PC
are replicated on the connected device. For more information about the new
docking stations for the LE and LS Series, contact your Motion sales representative
or visit the Motion Computing website at www.motioncomputing.com/accessories.
Motion Computing LE-Series and LS-Series Tablet PCs User Guide 61