Logging On To A Remembered Site; Configuring Strong Logon Security - Motion Computing LE1600 User Manual

8. Tap OK, Submit, Sign In, or Logon to access the site.
9. Tap Finish to complete the "Remember Password" procedure. The site
location, the credentials to access the site, and the authentication settings
for the site are now stored in the Motion OmniPass secure database.

Logging On To a Remembered Site

1. Open a website where you have set up the Motion OmniPass logon (that is,
a "Remembered Site").
2. Swipe your finger when you are prompted for a fingerprint/master password
authentication.
NOTE: You can remove a remembered site through the
OmniPass Control Center > Vault Management >
Manage Passwords option.
Exporting your user profile. The Motion OmniPass Help application contains
information about exporting your user profile. Go to Motion Dashboard then
Security panel > Motion OmniPass, and tap Help in the Action panel.

Configuring Strong Logon Security

Strong logon security can be configured to require authentication before showing
the Windows desktop. Be aware that enabling strong logon security will force you to
authenticate with a specific security device (e.g., the fingerprint reader, a Smart
Card) before allowing access to the Windows desktop. Once enabled, the Windows
XP Welcome screen and Windows fast switching will not be available on this Tablet
PC.
1. To enable Strong Logon Security, open the Motion Dashboard, tap
Security then Motion OmniPass to open the OmniPass Control Center.
2. Tap Change OmniPass System Settings
3. Tap Enable strong logon security. The Enable strong logon security
window is shown.
4. Tap the checkbox: Enable strong logon security.
Motion Computing LE-Series and LS-Series Tablet PCs User Guide 51