Pitney Bowes F601 Operating Manual page 7

The Feeder
2.4 Explanation of the menus (continued)
STOP
PAUSE
PAUSE
ADJUST
Run Mode Menu
STOP
CONTINUE
Pause Mode Menu
SPH: 2800
Adjustment Menu
Clear Counter
00075
Adjustment Menu
Counter
Remaining
Adjustment Menu
The "Run Mode Menu" is displayed when the Model
00075
F601 is started. In the "Run Mode Menu" there are
three options: "STOP", "PAUSE" and "ADJUST". Scroll/
select an option with the arrow buttons and confirm
with the OK button.
"STOP": The Model F601 (and attached units)
completes the set being processed and then stops.
You will be returned to the "Main Menu".
"PAUSE": The Model F601 (and attached units) is
00075
paused immediately. The text "PAUSE" will be replaced
with the text "CONTINUE". Select "CONTINUE" and
confirm with the OK button when you want to leave
the pause mode and start the system. Or, select
"STOP" and confirm with the OK button when you
want to leave the pause mode and stop the system.
"ADJUST": The "Run Mode Option Menus" can be
reached both when the Model F601 is paused and
while it is running. In the "Run Mode Option" menu
there are three options: "SETS PER HOUR", "CLEAR
COUNTER" and "PRESET COUNTER". Scroll/select
an option with the arrow buttons and confirm with the
OK button.
"SETS PER HOUR": Change the number of sets per
hour using the arrow buttons. The range is 1000 to
3600 sets per hour. Default value is 1800. The speed
will however be limited to match units attached.
"CLEAR COUNTER": Clears the set counter when the
OK button is pressed.
"PRESET COUNTER": Change the value of the preset
00100
counter using the arrow buttons. Default value is 0.
00025
This menu can also be used to check the setting of
the preset counter and the number of sets to go before
the job is completed.
NOTE: When checking, use the "ESC" button to
leave the menu without changing the settings.
6