Table of Contents
Advertisement
Safety
Introduction
Installing the Pump—HLUD
2
2
1
Product Overview
|
27
46
Installation
Operation
Use the illustration and instructions to install the
pump. Locate the pump where you can access the
mode handle, and perform regular maintenance.
3
The pump location must comply with the drive-shaft
requirements. Contact the drive shaft manufacturer
for more information.
1 Locate and drill the mounting holes, and cut the
flange cutout on the mounting plate. Refer to:
"Mounting Holes and Flange Cutout" on
page
26.
2 Use the lift-points to position the pump
assembly into the install location.
3 Locally source the appropriate hardware to
securely mount to the apparatus.
Maintenance
Advertisement
Table of Contents
