Table of Contents
Advertisement
Safety
Introduction
Use this document to install and operate your Waterous equipment. Understand
the following conditions before continuing with the document:
• The instructions may refer to options or equipment that you may not have
purchased with your system.
• The illustrations in this document are intended to convey concepts. Do not
use the illustrations to determine physical attributes, placement, or
proportion.
• Understand that your application may require additional steps, that are not
described in the illustrations or instructions, to perform the installation.
• The equipment described in this document is intended to be installed by a
person or persons with the necessary skills and knowledge to perform the
installation.
• The equipment described in this document is intended to be operated by a
person or persons with the basic knowledge of operating similar equipment.
• The information in this document is subject to change without notice.
This document is divided into the following sections:
Safety
This section describes general precautions and alert symbols that are in this
document.
Introduction
This section is an overview of the document.
Product Overview
This section describes the components that make-up the system.
Installation
This section describes the installation and initial setup procedures.
Operation
This section describes the equipment operation.
Maintenance
This section describes maintenance procedures.
Product Overview
Using this Document
Use the guidelines below when viewing this document.
Viewing the Document Electronically
• View this document in landscape orientation.
• Use the table of contents to navigate directly to that section.
• Text
Printing the Document
• The document is viewed the best when printed in color.
• The print on both sides and flip on long edge features can provide the
• Use a 3-ring binder to store the document.
Additional Documentation
Additional documentation is available through the MyWaterous login at
Waterousco.com. Use your serial number to gain access to the service parts
list associated with your system. Dimensional drawings are available through
the Waterous Service department.
Symbols
Here are the symbols found in the document a their definitions.
|
7
46
Installation
Operation
with this appearance
is linked to a reference.
best results.
Drill—This symbol tells you to drill the mounting holes in the
apparatus.
Jig saw—This symbol tells you to make a cutout in the apparatus.
Maintenance
Advertisement
Table of Contents
