C15 Push-Assist Speed Parameters Setting - KUNTENG KT-LCD10YN User Manual

ELECTRIC BICYCLE METER KT—LCD10YN Product User Manual
C14 parameter definition table:
C14 Value
After finishing C14 parameter setting, hold
current set values and enter C15 parameter setting interface.
○

C15 Push-assist Speed Parameters Setting

Enter C15 parameters setting interface, C15 flashes.
C15 is the setting of push-assist speed, default value is 6, range from 4-6, press
button or (DOWN) button to choose
C15valte
After finishing C15 parameter setting, hold
set values and enter C1 parameter setting interface again. Or hold
for about 2 seconds to exit C parameter setting environment and return to the display 1
○
Exit Parameter Setting
Under each parameter setting interface, if there's no button operation on the meter for
1
2
3
4
5
6
Assist strength of intelligent pedal motor
Weak assist strength of motor
General assist strength of motor
Stronger assist strength of motor
button (SW) shortly to save the
Push-assist speed
4Km/H
5Km/H
6Km/H
button (SW) shortly to save current
- 35 -
(UP)
button (SW) long