C3 Power-Assist Ratio Gear Initialization Setting - KUNTENG KT-LCD10YN User Manual

ELECTRIC BICYCLE METER KT—LCD10YN Product User Manual
C2 is motor phase classification coding setting, it is served as identification parameter
of different phases of the motor when using sine wave drive and the default value is 0.
When C2 setting is 0, indicating that the used Quantum motor phase is an ordinary one.
When the setting is a certain value, indicating a particular motor phase is used. C2 setting
range is 0-1, press
After finishing C2 parameter setting, press
values and enter C3 parameter setting interface.
○
C3 Power Assist Ratio Gear Initialization Setting
Enter C3 parameter setting interface, C3 parameter column flashes.
Press button (UP) or
The factory default is 8.
C3 parameter values：
C3
0
C2 parameter setting interface
button (UP) or
C3 parameter setting interface
button (DOWN) for selection C3 parameter values.
Parameter value meaning
The meter is powered on and the power assist ratio is at gear 0.
button (DOWN) for selection.
button (SW) to save the current set
- 24 -