Parameter Copy - KUNTENG KT-LCD10YN User Manual

ELECTRIC BICYCLE METER KT—LCD10YN Product User Manual
more than 1 minute, and then the meter will automatically return to display 1, and the
original set parameters will be saved.

Parameter Copy

Set parameters (include general project parameter, P parameter and C parameter) of
all KT-LCD10YN meter produced by our company according to requirements, and set the
meter to be a data source according to the method of "C11 meter attribute selection
setting".
Use special wiring cables to properly wire to LCD10YN meter needs to be copied
according to the diagram.
Turn on meter power supply of data source. Power supply of 48V or 36V or 24V is
available (VB + positive power supply). After wiring the meter needs to be copied, hold
Meter parameter copy wiring diagram
Special wiring cable
- 38 -