C5 Controller Maximum Current Adjustment Setting - KUNTENG KT-LCD10YN User Manual

ELECTRIC BICYCLE METER KT—LCD10YN Product User Manual
Handlebar gears is distinguished
4
according to the display meter.
5
When C4 = 2 is confirmed, "specified speed limit value of handlebar" flashes,
press (UP) button or
default value is 20.
When C4 = 4 is confirmed, the "percentage value of the first gear speed accounts
for its full speed" of the power assist gear flashes, press
(DOWN) button for short to make selection, and the default value is 50%. The
percentage values of other gears divide automatically in equal.
After finishing C4 parameter setting, press
values and enter C5 parameter setting interface.
○

C5 Controller Maximum Current Adjustment Setting

Enter C5 parameter setting interface, C5 parameter column flashes.
C5 is controller maximum operating current adjustment setting(tiny-adjustment of
limit current value), the default value is 10, setting range is 0-10,press
or button (DOWN) for selection.
C5 parameter definition table：
C5 value
Retain
(DOWN) button for short to make selection, and the
C5 parameter setting interface
- 26 -
6Km/h, after power assist, handlebar is full speed.
Stop power assist, return the handlebar speed limit
is 6Km/h.
Non-zero startup handlebar, Handlebar gears is
distinguished according to the display meter.
button (SW) to save the current set
Maximum current value(A)
Retain
(UP) button or
button (UP)