ELECTRIC BICYCLE METER KT—LCD10YN Product User Manual
(DOWN) button to make selection.
C13 parameter definition table:
C13 Value
0
1
2
3
4
5
The recommended value of C13 is 1; other values need to be chosen with caution for
use.
Be sure to note:
1. the higher is the braking intensity level, and the braking strength will be greater,
the greater damage to the motor shaft accordingly.
2. If the battery has a BMS function, disable this function.
After finishing the parameter setting of C13, press
C14 parameter setting interface.
○
C14 Power-assist tuning parameters Setting
Enter into C14 parameter setting interface, C14 parameter bar flashes.
C14 is the parameters of power-assist tuning setting, with the default value of 2. The
power-assist is between1-4 gear, and it is invalid until P3 equals to 1. The setting range 1-3,
and press
(UP) button or
ABS braking strength
None
Class 1 braking strength
Class2 braking strength
Class 3 braking strength
Class4 braking strength
Class5 braking strength
C14 parameter setting interface
(DOWN) button for short to make selection.
- 34 -
Energy recovery efficiency
None
Best energy recovery
efficiency
General energy recovery
efficiency
Weaker energy recovery
efficiency
Poor energy recovery
efficiency
Bad energy recovery
efficiency
(SW) button for short to enter