JVC CONNECTED CAM GY-HC500U Instructions Manual page 122

9 Sensitivity
For setting the response speed of the "Knee"
operation when [Knee] is set to "Auto".
Set to "Slow" when shooting an object under a
condition where there is drastic change in the light
intensity.
[Setting Values: RFast, Middle, Slow]
Memo :
This item cannot be configured when [Knee] is
0
set to "Manual".
This item cannot be configured when [Color
0
Space] is set to "J-Log1" or "HLG" and when
[Gamma] is set to "Cinema 2".
This item cannot be configured when [Infrared]
0
is set to "On".
9 Peak Filter
For configuring the response speed of the "Knee"
operation with respect to a high-luminance point
light source and the like when [Knee] is configured
to "Auto".
[Setting Values: RHigh, Middle, Low]
Memo :
This item cannot be configured when [Knee] is
0
set to "Manual".
This item cannot be configured when [Color
0
Space] is set to "J-Log1" or "HLG" and when
[Gamma] is set to "Cinema 2".
This item cannot be configured when [Infrared]
0
is set to "On".
122
Camera Process Menu
White Clip
For setting the point to apply white clip for video
signals with a high luminance level.
109%:
0
Applies white clip at the point where the
luminance level is 109%.
103%:
0
Applies white clip at the point where the
luminance level is 103 %.
100%:
0
Applies white clip at the point where the
luminance level is 100 %. Set to this value when
the system in use limits Y output signals within
100 %.
[Setting Values: R109%, 103%, 100%]
Memo :
The setting value of this item is stored separately
0
when [Color Space] is set to "HLG" or "J-Log1".
This item cannot be configured when [Infrared]
0
is set to "On".
White Balance...
Menu for adjusting white balance.
(A P124 [White Balance Item] )
* For details, refer to "[Adjusting the White
Balance] (A P 69)".