JVC CONNECTED CAM GY-HC500U Instructions Manual page 173

I Date/Time Display
Displays the date/time that is recorded on the
currently played recording media.
Memo :
The date/time display style can be specified in
0
[System] B [Date Style]/[Time Style].
(A P155 [ Date Style ] )
(A P156 [ Time Style ] )
J Network Connection Icon
The network connection status is displayed.
Icon
Wireless LAN connection from the
host terminal (USB) is established
.
Wired LAN connection from the
host terminal (USB) is established
.
Cellular adapter connection from
the host terminal (USB) is
established
.
When a USB adapter different
from the connection settings is
detected
.
Built-in wireless LAN connection is
established
A
.
LAN terminal connection is
established
.
When an unusable USB
0
(No adapter is detected
display) When the LAN cable is not
0
connected
Memo :
The icon appears blinking when the camera
0
recorder is starting up, and is displayed in yellow
while getting ready to connect.
Status
K Time Code (I)/User's Bit (J) Display
Displays the time code (hour: minute:
0
second: frame) or user's bit data recorded in
the recording media being played back.
Example of time code display:
0
0 0 : 0 0 : 0 0 : 0 0
*
.
* Colon (:) denotes non-drop frames and dot
(.) denotes drop frames.
Example of user's bit display:
0
F F E E DD 2 0
.
Memo :
Use [LCD/VF] B [Display Type] B [TC/UB] to
0
toggle between the time code display and user's
bit display.
L Check Mark
Displayed when the currently played clip is
selected.
M OK Mark
Displayed when OK mark has been appended.
(A P103 [Appending/Deleting OK Mark] )
N Media Status
PLAY : Playing
STILL : Still picture playback mode
FWD * : High-speed playback in the
forward direction (* playback
speed: 5x, 15x, 60x, or 360x)
REV * : High-speed playback in the
reverse direction (* reverse
playback speed: 5x, 15x, 60x, or
360x)
STOP : Stop mode
P.OFF : Power OFF
O Clip Information
Displays current clip number/total number of
clips.
P Media
Displays the media slot of the currently
0
played clip.
z appears when the write-protect switch of
0
the SD card is set.
Q Event/Warning Display Area
Displays error messages.
(A P248 [Error Messages and Actions] )
Display Screen in Media Mode
173