REAR PANEL
No.
Name
1
Wi-Fi
2
12V
3
Input port
4
USB 1-2
5
HDMI OUT
6
LAN
Hall Technologies
January 20, 2023
Description
Connect to the antenna pair provided for access to Miracast and the soft AP
function.
Connect to the DC 12V power adapter provided.
Connect to an HDMI and/or a USB-C source.
USB-A ports, supports the two following functions:
Connect to USB peripheral devices (e.g. keyboard, mouse, touch screen, etc.).
(1)
Note: Both USB ports can supply power to the USB peripheral devices:
USB1 port: outputs DC 5V 1A power
USB2 port: outputs DC 5V 0.5A power
Connect either port to a U-disk for firmware upgrade. For more information, see
(2)
Firmware Upgrade
Connect to an HDMI display.
Connect to a network device (e.g. network switch, router, computer, etc.) for LAN
control (Web GUI & Telnet API) and AirPlay mirroring signal input.
section.
Page 6 of 31