Soft Ap - Hall Technologies HT-RANGER User Manual

SOFT AP

UI Element
Soft AP
Soft AP
Password
Soft AP
Router
Apply
Hall Technologies January 20, 2023
Description
Click to enable/disable the switcher's soft AP function.
Configure soft AP password.
Note: The soft AP password must be 8~20 characters in length, including letters, numbers,
"_" or "-".
• Enable: Enable the device's soft AP router function so that wireless devices connected
to soft AP can access the internet (in the condition that the LAN port of the device is
connected to the internet).
•
Disable: Disable the device's soft AP function to prevent wireless devices connected to
soft AP from accessing the internet.
Note:
Before you use this feature, ensure the soft AP function is enabled.
(1)
When the device's IP mode is set as Static, you must configure the LAN port's
(2)
gateway and DNS correctly so that soft AP router runs properly.
Click to perform current settings.
Page 20 of 31